Skip to content

ITP 110 Final Data

The ITP profiler was configured to operate on a standard sampling schedule of 2 one-way profiles between 7 and 760 m depth each day.  In the surface package, the GPS receiver was powered every 30 minutes to obtain locations, and buoy temperature and battery voltage status were recorded.

The plots to the right are of the final, calibrated, edited data (as opposed to the raw data presented on the active instrument pages).

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.

ITP 110 data can also be found at the links below:

Level II hourly buoy location data in ASCII format: itp110rawlocs.dat

Level III 1-Hz processed profile and SAMI data in MATLAB format: itp110cormat.tar.Z and itp110cormat.zip

Level III 1-db bin-averaged processed profile and SAMI data in MATLAB format: itp110final.mat
Level III 1-db bin-averaged processed profile and SAMI data in ASCII format: itp110final.tar.Z and itp110final.zip

Deployment

Data Processing

 

Plot of buoy locations.
ITP 110 Temperature and Salinity contours.
Composite plot of ITP temperature and salinity profiles.
ITP 65 dissolved oxygen contours.
Composite plot of ITP dissolved oxygen profiles.
Plot of SAMI time series.
Scroll To Top