Skip to content

ITP 105 Data Processing

The 6064 profiles that were transmitted from the ITP were processed according to the procedures described in the ITP Updated Data Processing Procedures.  The processing parameters are shown in the figures to the right.  The processing procedures for the MAVS current probe are described in Cole et al. (2015).

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.

References:

Cole, S.T., F.T. Thwaites, R.A. Krishfield, and J.M. Toole, 2015.  Processing of velocity Observations from Ice-Tethered Profilers, Proceedings OCEANS’15 MTS/IEEE Conference, Washington, DC. IEEE Xplore, doi:10.23919/OCEANS.2015.7401887

Final Data

ITP surface buoy status.
ITP profiler engineering data.
Number of bad points removed (top); variance of vertical difference of temperature and salinity in step region for up-going profiles; depth of staircase layer; temperature lag (bottom).
Top: conductivity lag, Middle: conductivity thermal mass amplitude correction, Bottom: conductivity thermal mass lag correction.
Top: down pressure deviation correction, Middle: salinity ratio adjustment, Bottom: Number of filtered spikes.
Top: Geomagnetic declination correction, Bottom: Correction due to sound speed.
Scroll To Top