Skip to content

ITP 80 Data Description

The ITP profiler was configured with a complicated pattern profiling schedule with stationary (at 7 m), shallow (7-250 m) and deep (7-750 m) profiles to maximize the velocity observations. In the surface package, the GPS receiver was powered hourly to obtain locations hourly, and buoy temperature and battery voltage status were recorded.

The plots to the right are of the final, calibrated, edited data (as opposed to the raw data presented on the active instrument pages).

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.

ITP 80 data can also be found at the links below:

Level II hourly buoy location data in ASCII format: itp80rawlocs.dat

Level III 1-Hz processed profile and microcat data in MATLAB format: itp80cormat.tar.Z and itp80cormat.zip

Level III 1-db bin-averaged processed profile and microcat data in MATLAB format: itp80final.mat

Level III 1-db bin-averaged processed profile and microcat data in ASCII format: itp80final.tar.Z and itp80final.zip

Plot of buoy locations.
ITP 80 Temperature and Salinity contours.
Composite plot of ITP temperature and salinity profiles.
ITP 80 East and North velocity contours.
Composite plot of East and North velocity profiles.
Plot of microcat time series.
Scroll To Top