Skip to content

ITP 114 Final Data

The ITP profiler was configured with a complicated pattern profiling schedule with stationary (at 7 m), shallow (7-250 m) and deep (7-750 m) profiles to maximize the velocity observations.  In the surface package, the GPS receiver was powered every 30 minutes to obtain locations, and buoy temperature and battery voltage status were recorded.

The plots to the right are of the final, calibrated, edited data (as opposed to the raw data presented on the active instrument pages).

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.

ITP 114 data can also be found at the links below:

Level II hourly buoy location data in ASCII format: itp114rawlocs.dat

Level III 1-Hz processed profile and microcat data in MATLAB format: itp114cormat.tar.Z and itp114cormat.zip

Level III 1-db bin-averaged processed profile and microcat data in MATLAB format: itp114final.mat
Level III 1-db bin-averaged processed profile and microcat data in ASCII format: itp114final.tar.Z and itp114final.zip

Deployment

Data Processing

Plot of buoy locations.
Plot of buoy locations.
ITP 114 Temperature and Salinity contours.
ITP 114 Temperature and Salinity contours.
Composite plot of ITP temperature and salinity profiles.
Composite plot of ITP temperature and salinity profiles.
ITP 114 East and North velocity contours.
ITP 114 East and North velocity contours.
Composite plot of East and North velocity profiles.
Composite plot of East and North velocity profiles.
Plot of microcat 1 time series.
Plot of microcat 1 time series.
Plot of microcat 2 time series.
Plot of microcat 2 time series.
Scroll To Top