Skip to content
Home   »   Data   »   Completed Missions   »   ITP 111 Overview   »   ITP 111 Data Processing

ITP 111 Data Processing

The 606 profiles that were transmitted from the ITP were processed according to the procedures described in the ITP Updated Data Processing Procedures.  The processing parameters for are shown in the figures to the right.

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.

Deployment

Final Data

ITP surface buoy status.
ITP surface buoy status.
ITP profiler engineering data.
ITP profiler engineering data.
Number of bad points removed (top); variance of vertical difference of temperature and salinity in step region for up-going profiles; depth of staircase layer; temperature lag (bottom).
Number of bad points removed (top); variance of vertical difference of temperature and salinity in step region for up-going profiles; depth of staircase layer; temperature lag (bottom).
Top: conductivity lag, Middle: conductivity thermal mass amplitude correction, Bottom: conductivity thermal mass lag correction.
Top: conductivity lag, Middle: conductivity thermal mass amplitude correction, Bottom: conductivity thermal mass lag correction.
Top: down pressure deviation correction, Middle: salinity ratio adjustment, Bottom: Number of filtered spikes.
Top: down pressure deviation correction, Middle: salinity ratio adjustment, Bottom: Number of filtered spikes.
Scroll To Top