ITP 114 Final Data
The ITP profiler was configured with a complicated pattern profiling schedule with stationary (at 7 m), shallow (7-250 m) and deep (7-750 m) profiles to maximize the velocity observations. In the surface package, the GPS receiver was powered every 30 minutes to obtain locations, and buoy temperature and battery voltage status were recorded.
The plots to the right are of the final, calibrated, edited data (as opposed to the raw data presented on the active instrument pages).
See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.
ITP 114 data can also be found at the links below:
Level II hourly buoy location data in ASCII format: itp114rawlocs.dat
Level III 1-Hz processed profile and microcat data in MATLAB format: itp114cormat.tar.Z and itp114cormat.zip
Level III 1-db bin-averaged processed profile and microcat data in MATLAB format: itp114final.mat
Level III 1-db bin-averaged processed profile and microcat data in ASCII format: itp114final.tar.Z and itp114final.zip
