Skip to content

ITP84 Data Processing

The 842 profiles that were transmitted from the ITP were processed according to the procedures described in the ITP Updated Data Processing Procedures.  The processing parameters for the CTD and dissolved oxygen data are shown in the figures to the right.  The SAMI data validation are described in Islam et al., (2017).

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.

References:

Islam, F., M.D. DeGrandpre, C.M Beatty, M.-L. Timmermans, R.A. Krishfield, J.M Toole, and S.R. Laney, 2017. Sea surface pCO2 and O2 dynamics in the partially ice-covered Arctic Ocean. Journal of Geophysical Research, Vol. 122, doi:10.1002/2016JC012162.

ITP surface buoy status.
ITP profiler engineering data.
Number of bad points removed (top); variance of vertical difference of temperature and salinity in step region for up-going profiles; depth of staircase layer; temperature lag (bottom).
Top: conductivity lag, Middle: conductivity thermal mass amplitude correction, Bottom: conductivity thermal mass lag correction.
Top: down pressure deviation correction, Middle: salinity ratio adjustment, Bottom: Number of filtered spikes.
Scroll To Top